This is the taller pedestal guard with the
standard instrument pod. When I purchased the boat I had got the ST60
Tridata instrument so to combine the depth and speed
displays.
Starting on the lower left, I have the RamMic installed and was checked to insure there was no interfence with the compass.
Left center is the ST60 Tridata, Right Center is the Wind Machine display.
Lower right is the Raymarine 4000+ autopilot display.
Black thing in the middle is the compass.
Installed from the pedestal is a mount arm from Edson that holds the Garmin 176 GPS.
Starting on the lower left, I have the RamMic installed and was checked to insure there was no interfence with the compass.
Left center is the ST60 Tridata, Right Center is the Wind Machine display.
Lower right is the Raymarine 4000+ autopilot display.
Black thing in the middle is the compass.
Installed from the pedestal is a mount arm from Edson that holds the Garmin 176 GPS.
This is the port side of the pedestal, showing how the cables were routed out of the pod.
Starboard side has a 12 volt power outlet.
You can also see how I identified the "Forward Idle", "Idle" and "Reverse Idle" power locations.
This helps the wife and I find the right spots.